Smartlathe Brain System Chuck Clamping Mode Switch: Internal and External Clamping

In the daily CNC lathe production process, it is often necessary to change the chuck clamping method depending on the workpiece clamping needs. The smartlathe brain CNC lathe control system sets the parameters for switching between internal and external clamping. It is possible to quickly switch between the clamping methods by changing only one parameter setting.

1. Parameter Settings for Switching Chuck Clamping Mode

On the machine tool operation panel, locate the parameters button and press to enter.

After entering the parameter menu, find machine parameter No. 0092 in the parameter list. If you need to switch to internal clamping, input "1," press "Enter," then enter the machine password. This will activate the internal clamping function.

2.Chuck Clamping Direction

Chuck internal clamping direction

Chuck external clamping direction

After changing the chuck parameter on the machine panel, you can determine whether the internal or external clamping function is activated by observing the clamping direction of the chuck.